Flow detectors

Serie EMPO

Flow testing for components intended for the automotive, pneumatic, hydraulic, and domestic sectors.

Measure flow in supply or capture.

Programmable minimum/maximum pressure and minimum/maximum flow thresholds.

Programmable maximum pressure and flow.

Product brochure

PDF

Additional information

Number of channels	1 Channel
Measurement method	Direct flow measurement with flow sensors
Working pressure	Standard: -1÷0 Bar (vacuum) — 0÷0.35 Bar — 0÷1 Bar — 0÷2 Bar — 0÷4 Bar — Other pressures on request
Pressure measurement resolution	1 mBar
Non-linearity error in pressure measurement	Less than 0.3%
Flow measurement range	Standard: 0 ÷ 50 ml/min, resolution 0.01 ml/min 0 ÷ 500 ml/min, resolution 0.1 ml/min 0 ÷ 5 l/min, resolution 0.001 l/min 0 ÷ 10 l/min, resolution 0.001 l/min 0 ÷ 50 l/min, resolution 0.01 l/min 0 ÷ 100 l/min, resolution 0.01 l/min 0 ÷ 400 l/min, resolution 0.1 l/min 0 ÷ 500 l/min, resolution 0.1 l/min Other measurement ranges on request
Non-linearity error in flow measurement	Less than 1%
Display	LED, 4¾ digits
Programmable thresholds	Minimum – maximum pressure Minimum – maximum flow
I/O signals	At PLC level, optoisolated, PNP 24 VDC IN: air supply command OUT: good, reject, pressure reject, flow reject
Power supply	Standard: 100-240 VAC / 50-60 Hz
Dimensions	235 x 290 x 355 mm (W x H x D)
Initial calibration	Carried out based on samples referred to national standards
Warranty	24 months

Clients and Partners

We tackle the testing challenges that off-the-shelf instrumentation can't handle-trusted by clients such as
FIAT, Volkswagen, Audi, BMW, Lamborghini, Ferrari, Porsche, Electrolux, Lavazza, Medtronic, Nespresso, Whirlpool, and Zanussi...

Do you need to calculate the dimensions or verify the parameters of a leak test?

Try our online calculator: it converts units of measurement, simulates pressure decay, and answers the most common technical questions.

Go to the calculator

Why Choose ECB

Since 1991, we’ve been designing systems for leak testing, flow testing, and functional testing. We offer off-the-shelf instruments from our catalog for standard tests, and custom systems designed for your specific component when a standard solution isn’t available. Technical support, calibration, and replacement parts remain available even for ECB instruments that have been out of production for years.